Service Hotline
Tel: +86-010-89797600
WIX-dryBATH-HCS Constant Temperature Oscillating Thermo Dry Bath
Excellent and accurate system for temperature control with control range of 15℃-100℃.
The deviation is ±0.5℃ under the temperature of 20-45℃.
The maximum rotated speed is 1500 rpm (depending on the specific block).
Various selection of bearing blocks.
Programme editing and storage available.
Push-and-pull chucking block connection; The block is adhered to machine automatically without any tools.
Equipped with cover of insulation function block to avoid heat loss.
Technical parameter
Function: Heating,cooling and mixing.
Temperature range[℃ ]: Minimum lower than the room temperature 15 ℃, Maximum 100 ℃
Temperature set range: [℃ ] 0.1℃~100℃
The deviation range [20–45℃ ] ± 0.5℃
Temperature uniformity [20–45℃ ] ± 0.5℃
Maximum heating speed [℃/min] 5.5
Maximum cooling speed [℃/min] 5℃ (from 100℃ to the room temperature), 0.5℃ (lower than room temperature)
Speed adjustment [rpm] 200–1500
Mixing diameter [mm] 3
Screen specification LCD
Maximum programme number 9
Input voltage 100-240V, 50Hz/60Hz
Power 200 W
Time set range: 1min~99h59min
Dimension mm: 264×183×133 (L×W×H) (excluding block size)
Working environment temperature 5~40℃
Working environment moisture 80%
Heating block accessories
Item No Specification Item
18900238 Applicable to 0.5mL centrifugal tube, 24 holes
18900237 Applicable to 1.5mL centrifugal tube, 24 holes
18900239 Applicable to 2mL centrifugal tube, 24 holes
18900240 Applicable to 5mL centrifugal tube, 8 holes
18900241 Applicable to 15mL centrifugal tube, 8 holes
18900242 Applicable to 50mL centrifugal tube, 4 holes
18900243 Applicable to 1.2mL PCR tube
18900244 Applicable to 96/384 plate
New block is compatible with Eppendorf tube
18900353 Heating block, applicable to 5mL centrifugal tube, 8 holes
18900354 Heating block, applicable to 5mL centrifugal tube, 8 holes, cone bottom, only applicable to new machine.
18900355 Heating block, applicable to 15mL centrifugal tube, 8 holes
18900356 Heating block, applicable to 50mL centrifugal tube, 4 holes
Excellent and accurate system for temperature control with control range of 15℃-100℃.
The deviation is ±0.5℃ under the temperature of 20-45℃.
The maximum rotated speed is 1500 rpm (depending on the specific block).
Various selection of bearing blocks.
Programme editing and storage available.
Push-and-pull chucking block connection; The block is adhered to machine automatically without any tools.
Equipped with cover of insulation function block to avoid heat loss.
Technical parameter
Function: Heating,cooling and mixing.
Temperature range[℃ ]: Minimum lower than the room temperature 15 ℃, Maximum 100 ℃
Temperature set range: [℃ ] 0.1℃~100℃
The deviation range [20–45℃ ] ± 0.5℃
Temperature uniformity [20–45℃ ] ± 0.5℃
Maximum heating speed [℃/min] 5.5
Maximum cooling speed [℃/min] 5℃ (from 100℃ to the room temperature), 0.5℃ (lower than room temperature)
Speed adjustment [rpm] 200–1500
Mixing diameter [mm] 3
Screen specification LCD
Maximum programme number 9
Input voltage 100-240V, 50Hz/60Hz
Power 200 W
Time set range: 1min~99h59min
Dimension mm: 264×183×133 (L×W×H) (excluding block size)
Working environment temperature 5~40℃
Working environment moisture 80%
Heating block accessories
Item No Specification Item
18900238 Applicable to 0.5mL centrifugal tube, 24 holes
18900237 Applicable to 1.5mL centrifugal tube, 24 holes
18900239 Applicable to 2mL centrifugal tube, 24 holes
18900240 Applicable to 5mL centrifugal tube, 8 holes
18900241 Applicable to 15mL centrifugal tube, 8 holes
18900242 Applicable to 50mL centrifugal tube, 4 holes
18900243 Applicable to 1.2mL PCR tube
18900244 Applicable to 96/384 plate
New block is compatible with Eppendorf tube
18900353 Heating block, applicable to 5mL centrifugal tube, 8 holes
18900354 Heating block, applicable to 5mL centrifugal tube, 8 holes, cone bottom, only applicable to new machine.
18900355 Heating block, applicable to 15mL centrifugal tube, 8 holes
18900356 Heating block, applicable to 50mL centrifugal tube, 4 holes
